Troubleshooting - Mi-T-M GEN-6000-0MKD Mode D'emploi

SYMPTOM
Engine will not start.
Generator has no output.
Operator's Manual

Troubleshooting

PROBLEM
Engine switch is off.
Fuel Tank empty.
Fuel Valve is off.
Circuit breakers tripped.
Inadequate cord sets or
extension cords.
SOLUTION
Turn engine switch to the ON position.
Fill tank per instructions in this manual.
Turn Fuel Valve on.
Consult Mi-T-M Customer Service.
Reset circuit breakers.
Check cord sets or extension cords
capabilities in section Controls;
Cable Size in this manual.
Consult Mi-T-M Customer Service.
17