Setting The Temperature; Switching Off The Cooling Device; Using The Interior Light (Only Mcf60); Defrosting The Cooling Device - Mobicool MCF 32 Notice D'utilisation

Operation
6.7

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "+" and "–" buttons to select the cooling temperature.
✔ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is
displayed again.
6.8

Switching off the cooling device

➤ Empty the cooling device.
➤ Switch the cooling device off.
➤ Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
6.9

Using the interior light (only MCF60)

➤ Ensure the display shows the actual temperature.
➤ Press the "–" button to switch the interior light on.
➤ Press the "–" button again to switch the interior light off.
✔ The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
NOTE
The interior light switches off automatically after 30 minutes.
6.10

Defrosting the cooling device

Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
16
MCF32, MCF40, MCF60, FR40 AC/DC
EN