Operation; Before Initial Use; Saving Energy; Connecting The Cooling Device - Mobicool MCF 32 Notice D'utilisation

Operation

6 Operation
6.1

Before initial use

I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 17).
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
Proceed as follows:
➤ Switch on the cooling device.
➤ Press the "SET" button twice.
➤ Use the "+" and "–" buttons to select Celsius or Fahrenheit.
✔ The selected temperature units then appear in the display for a few
seconds. The display flashes several times before it returns to the current
temperature.
6.2

Saving energy

 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 If the cooler has a basket: For optimal energy consumption, position the
basket according to its position on delivery.
 On a regularly basis, make sure the lid seal still fits properly.
6.3

Connecting the cooling device

The cooling device can be operated with DC or AC voltage.
12
MCF32, MCF40, MCF60, FR40 AC/DC
EN