Powered) Seating Options - Sunrise Medical QUICKIE Q700-UP M Manuel D'utilisation

5.9 (Powered) seating options

The wheelchair can be equipped by the following mechanical and/or
powered options to adjust your seating position. These options can
be operated by the user without the use of tools.
Powered adjustable seating options (Fig.5.9 - Fig.5.11).
How to operate these powered seating options can be found in &
Controller:
1. Powered tilt function
2. Powered seat elevator
3. Powered backrest recline
4. Powered elevating leg rests
5. Powered stand-up function
DANGER!
• Use of the powered adjustable seating options may influence the
stability of the wheelchair.
• Only use the powered adjustable seating options when the
wheelchair is on a flat surface! Do Not attempt to operate any
power seating option while positioned on an incline.
• Please stay clear of any powered actuator while the component
is in motion. Sunrise power mechanisms move over large ranges
of travel. Users should be aware of their surroundings while
components are in motion.
• While driving this seating system in the reclined, elevated, or tilted
position use caution.
• Do Not attempt to operate any power seating option while this
seating system is in motion.
• Do not attempt to operate the lift or tilt power seating options
around children.
• Through programming it is possible to reverse the direction of all
powered seating functions, ensure you know which direction your
seat is going to move before operating.
• Please be aware that the lift/tilt modules present a trap hazard.
Make sure that during operation the lift/tilt modules are free from
all clothing, hands, feet and other extremities, to prevent injury.
• Do not drive on ramps or slopes with the seating in the elevated
position. Before attempting to climb or descend a slope, return the
wheelchair to a standard seated drive position, with the backrest
upright.
• This power system is designed to automatically reduce the
maximum driving speed to a creep mode or stop when certain
power seating limits are reached. Depending on the configuration
of the chair there might be multiple creep speeds.
18
1000 mm
Fig. 5.9
Fig. 5.10
Fig. 5.11
Q700-UP M/F Rev.B