Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
24 Progress
The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting.
Touch
and
at the same time to
deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
touch
(
comes on). Immediately touch
until the correct heat setting comes on.
After 3 seconds
To deactivate the function: touch
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the highest
heat setting.
Refer to "Technical information"
chapter.
To activate the function for a cooking
zone: touch
.
To deactivate the function: touch
.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
comes on). Immediately
comes on.
comes on.
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
To set the cooking zone: touch
and again until the indicator of a necessary
cooking zone comes on.
To activate the function or change the
time: touch
time (00 - 99 minutes). When the indicator
of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and 00
.
flashes. The cooking zone
deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
cooking zones do not operate (the heat
setting display shows
To activate the function: touch
Touch
or
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
or
The function has no effect on
the operation of the cooking
zones.
Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
or
of the timer to set the
. The indicator of the
and touch
.
).
of the timer to set the time.
.
again
. The
.
Publicité
Chapitres
Table des Matières
