EUROM ALUTHERM VERRE Wifi Manuel D'utilisation page 58

Using with the remote control:
The remote control (5) has the same 6 buttons as the
operating panel (MOD = MODE) and works in roughly the
same way, but:
 You cannot use the remote control (under M-mode) to set
the capacity with the + or - buttons. Use the bar
button for this purpose.
 The remote control has an ECO button for an energy
efficient mode; the heater maintains the room at
16°C. The screen shows EC. Deactivate by
pressing ECO again.
under this setting.
If the heater is working on ECO setting and a timer setting
becomes active, the heater will start to work according to the
timer setting. When the heat goes off, the heater will not
return to the ECO setting, but go off.
 The remote control also has an open-window detection;
when you choose this function, the heater will
turn itself off when the temperature in the room
drops by 8 or more degrees in 15 minutes. Turn
the heater on again with the on/off button. Press the symbol again to
cancel the open-window detection. The heater will begin to work in the
pre-set function. When the heater operates according to a set week programme
and you turn on the open-window detection, the heater will only work during the
set operating times of the week programme.
Working with the app via wifi:
The heater can also be operated using an app on your smartphone. The heater
must be connected with a wifi modem. See the back of the booklet for instructions
on how to install the app. By activating the app on your smartphone or tablet, and
selecting the device, you can operate the heater with the smartphone. You do not
need to set a day or time as they are set automatically (both on the app and on the
display).
You can use the app to switch the device on and off, regulate the temperature and
capacity, set the ECO setting and open-window detection. The app can also be used
to set 20 on and off settings daily, on the weekly timer.
If the device is connected with wifi and is switched on, the display will
show (during screen saver) the wifi symbol and ON. If the device is
connected to wifi but switched off, the display will show the wifi symbol
and OFF.
Note: timer settings that are created using the app are not visible on the display;
timer settings that are created using the operating panel or remote control are not
visible on the app! Once there is a wifi connection, you cannot create a new weekly
Nothing else can be set
58