Philips S99 Série Mode D'emploi page 31

4 Remove the shavings heads from the shaving head
holder and throw them away.
5 Place new shaving heads in the holder.
Note: Make sure the notches on both sides of the shaving heads
fit exactly onto the projections in the shaving-head holder.
6 Place the retaining ring holder on the retaining
ring (1), place it on the shaving head (2) and turn it
clockwise (3) to reattach the retaining ring.
Repeat this process for the other retaining rings.
Note: Hold the shaving head holder in your hand when you
reinsert the shaving heads and reattach the retaining rings.
Do not place the shaving head holder on a surface when you
do this, as this may cause damage.
7 Reattach the shaving head holder to the bottom part
of the shaving unit.
8 To reset the shaver, press and hold the on/off button
for approx. 7 seconds. Wait until you hear two beeps.
ENGLISH
31