Thorough Cleaning Method - Philips S99 Série Mode D'emploi

2 Pull the shaving head holder off the bottom part of
the shaving unit.
3 Rinse the shaving head holder under a warm tap.
4 Carefully shake off excess water and let the shaving
head holder dry.
5 Reattach the shaving head holder to the bottom part
of the shaving unit ('click').

Thorough cleaning method

Make sure the appliance is switched off.
1 Pull the shaving head holder off the bottom part of
the shaving unit.
2 Place the retaining ring holder on the retaining ring
(1), turn it anticlockwise (2) and lift it off the shaving
head (3).
Remove the retaining ring from the retaining ring holder
and repeat this process for the other retaining rings.
3 Remove the shaving heads from the shaving head holder.
Each shaving head consists of a cutter and guard.
Note: Do not clean more than one cutter and guard at a
time, since they are all matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may take several weeks
before optimal shaving performance is restored.
ENGLISH
27