Philips S99 Série Mode D'emploi page 36

ENGLISH
36
Problem
The shaver is
not entirely clean
after I clean it in
the SmartClean
system.
The shaver is
not fully charged
after I charge it in
the SmartClean
system.
Possible cause
You have not
placed the shaver in
the SmartClean
system properly,
so there is no electrical
connection between
the SmartClean system
and the shaver.
The cleaning cartridge
needs replacement.
The cleaning cartridge is
empty.The replacement
symbol flashes to
indicate you have to
replace the cleaning
cartridge.
You have used another
cleaning fluid than the
original Philips cleaning
cartridge.
The drain of the
cleaning cartridge might
be blocked.
You have not placed
the shaver in the
SmartClean system
properly.
Solution
Press down the top cap ('click')
to ensure a proper connection
between the shaver and the
SmartClean system.
Replace the cleaning cartridge
(see chapter 'Cleaning and
maintenance').
Place a new cleaning cartridge
in the SmartClean system
(see chapter 'Cleaning and
maintenance').
Only use the Philips cleaning
cartridge.
Push the hairs down the drain
with a toothpick.
Press down the top cap ('click')
to ensure a proper connection
between the shaver and the
SmartClean system.