Philips S99 Série Mode D'emploi page 25

4 Press the on/off button on the SmartClean system to
start the cleaning program.
, The on/off button and the rinsing symbol both light up
continuously.
Note: The rinsing phase takes approx. 10 minutes.
Note: The progress bar shows the progress of the rinsing phase.
, During the drying phase, the drying symbol lights up
continuously.
Note: The drying phase takes approx. 4 hours.
Note: The progress bar shows the progress of the drying phase.
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to indicate
that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the SmartClean system
during the cleaning program, the program aborts. In this case,
the rinsing or drying symbol goes out.
Note: If you remove the adapter from the wall socket during
the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and charging
have been completed, the SmartClean switches off
automatically.
Replacing the cartridge of the SmartClean System
- Replace the cleaning cartridge when the replacement
symbol flashes orange or when you are no longer
satisfied with the result.
1 Press the button on the side of the SmartClean
system (1) and lift the top part of the SmartClean
system (2).
ENGLISH
25