If The Top Tire Bead Is Difficult To Mount - Hofmann monty 1520-2 Notice D'utilisation

36
5.2.4
5.2.1-1
5.2.1-2
monty 1520-2
5.2.1

If the top tire bead is difficult to mount

Option 1)
Use the EasyMont-Pro optional accessory, #MH310.
Follow the separate instruction provided.
Option 2)
Follow these instructions using the optional bead clamp
MX (Fig. 5.2.4), (optional EAA0247G70A).
A. After installing, the bottom bead insert the tire
tool to the left of the bead head as shown (Fig.
5.2.1-1). To protect decorative rims use
protective sleeve p/n EAA0247G04A (optional).
B. Step on the foot pedal to rotate the turntable
clockwise until the tire lever is tight against
the bead head (Fig. 5.2.1-1).
C. Using your right hand push and hold the tire
bead opposite the bead head into the rim drop
centre.
D. Position the bead clamp (optional) to hold the
tire bead into the rim drop centre (Fig. 5.2.4).
E. As the turntable is turning use the tire tool in
your left hand to raise and guide the tire bead
onto the bead head (Fig. 5.2.1-2).
F. Continue to rotate the turntable until the top
bead is mounted.
Do not remove the tire tool or bead clamp until the foot
pedal is released.
Operator's Manual
USA - CANADA