Parameter Settings; Setting Parameters - Daikin EKHHP300A2V3 Manuel D'installation Et D'utilisation

Fig. 5-3 Delete individual switching times
DAIKIN EKHHP(3/5)00AA2V3
DAIKIN Hot water heat pump
008.1423444_02 – 09/2015
5 x Operation, Parameters
Deleting all switching times of an operating mode
Only all switching times for a weekday of a certain operating
mode can be deleted per delete operation.
To do this, proceed as described in section "Delete individual
switching times", but, after selecting the weekday, hold down the
key twice, one after the other, for 5 secs.

5.5 Parameter settings

All parameters of the control are described in detail in this
section. An overview of all parameters, their factory settings and
setting ranges are listed in tab. 5-5.
DAIKIN recommends you note all changes to the pa-
rameters and switching times in the tables in
section 5.5.4 and section 5.5.5.

5.5.1 Setting parameters

Each parameter/function is allocated a 3-digit code (e.g. [0-03]),
which is displayed on the controller display (fig. 5-4, item 2).
The first number [0] shows the parameter group (Code 1 in
tab. 5-5). The second and third number [03] show the relevant
parameter in this group of parameters (Code 2 in tab. 5-5).
1 Parameter value
2 Parameter code
Fig. 5-4 Parameter setting on the controller
1. Press key for at least 5 s.

The icon is displayed.

The current parameter code
item 2).

The set parameter value
ter code is displayed (fig. 5-4, item 1).
In order to set the parameter groups 2 to C (area
marked in grey in tab. 5-5) ("Advanced Mode"), you
need to push the
2. Use the key to select the parameter group.
3. Use the key to select the parameter to be set.
or
4. Use one of the
of the parameter selected.
5. Press the key to save the value.
6. Repeat steps 2 to 5 to set other parameters or press the
key briefly to exit the parameter setting mode.
3 Display parameter setting
mode active
is displayed (fig. 5-4,
of the relevant parame-
key again for at least 10 secs.
keys to change the setting
Installation and maintenance manual
23