Removing The Insert And Loading Pellets - Dal Zotto INSERTO 700 2.0 Manuel Utilisateur

INSERT LOCKING AND RELEASING SAFETY DEVICE
Open the door and turn, using the poker supplied, insert the lockbolt in the corner at the bottom on the left and turn anticlockwise to open
(release) or clockwise to close (lock).
OPEN RELEASED
CLOSED LOCKED
To understand whether the insert is attached to the base properly, connect the plug to the socket and make sure it works with the supplied
remote control.

REMOVING THE INSERT AND LOADING PELLETS

The extraction of the insert allows pellets to be loaded inside the feed-box and to perform routine maintenance, (cleaning the ash pipe at the
end of the year) or special maintenance (replacement of mechanical parts if the product should break).
Follow this procedure to extract the insert:
Open the door and turn the lockbolt in the corner at the bottom on the left anticlockwise.
Using the relevant pokers, pull the machine towards yourself until it blocks automatically.
THE INSERT MUST ONLY BE EXTRACTED WHEN THE MACHINE IS SWITCHED OFF AND COMPLETELY COLD!
ENGLISH 49