Inserto 700 2.0 Installation; Components Description; Minimum Dimensions - Dal Zotto INSERTO 700 2.0 Manuel Utilisateur

INSERTO 700 2.0 INSTALLATION

The insert is supplied with a sliding metal base that allows it to be installed in a pre-existing ue.
The sliding base allows the easy extraction of the insert both for feeding pellets into the feed-box and for any maintenance or cleaning at the
end of the season. If there is no pre-existing ue, it can be built using the insert support pedestal (optional kit); in fact, the latter attaches the
insert to the oor.

COMPONENTS DESCRIPTION:

A. Primary air intake pipe
B. Flue exhaust pipe
C. Adaptation frame
D. Sliding base and rails

MINIMUM DIMENSIONS

44
C
INSERTO 700 2.0
MINIMUM 500 X 720mm WITHOUT OPTIONAL DRAWER
MINIMUM 570 X 720mm WITH OPTIONAL DRAWER
*
*
ENGLISH
A
720
B
D