V2 AIR
NOT USED
T
he menu allows to adjust the speed of the ducted fan in percentage.
CONTROLS PROCEDURE
Press key 6 and SET CLOCK will appear.
Press key 2 several times until USER is displayed.
Press key 6.
Press key 2 until "V2 AIR" appears.
Use keys 4 -5 to increase (4) or decrease (5)
Press key 6 to con rm and key 1 to return to the previous menus up to the
initial status.
RESET
Allows to reset all values modi able by the user to the default values. The modi ed data is the following:
CONTROLS PROCEDURE
Press key 6 and SET CLOCK will appear.
Press key 2 several times until USER is displayed.
Press key 6.
Press key 2 until "RESET" appears.
Press keys 4-5 to select ON and press key 6.
"DONE" will appear on the display to con rm
ENABLE CHRONO
It allows to enable/disable the chrono and the various time slots.
CONTROLS PROCEDURE
Press key 6 and SET CLOCK will appear.
Press key 2 several times until ENABLE CHRONO is displayed.
Press key 6, to con rm and use keys 4-5 to enable "ON" or disable "OFF" the chrono.
Use keys 2 -3 to select the desired time slot
Use keys 4-5 to enable "ON" or disable "OFF" the selected time slot.
Press key 1 several times to con rm and exit the menu.
CHRONO
The chrono allows to program 4 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time slot, along with the days of use of the programmed time slot and the
desired room temperature (07 - 40°C).
RECOMMENDATIONS
The ignition and switch-o times must be within the arc of one day,
from 0 to 24 and not over several days:
Before using the chrono function, set the current day and time.
Therefore check that the points listed in the "Set clock" sub-chapter
have been followed, so that the chrono function works. Aside from
programming it, activate it as well.
EXAMPLE:
SWITCH ON TIME 07:00
SWITCH OFF TIME 18:00
CORRECT
ENGLISH
IGNITION 22:00
SWITCH
OFF 05:00
2
INCORRECT
59