Mounting The Frames - Dal Zotto INSERTO 700 2.0 Manuel Utilisateur

MOUNTING THE FRAMES

As standard, the insert has a nishing frame that, as well as nishing, covers the side slot required between the structure and covering.
INSERTO 700 2.0 UPPER FRAME ASSEMBLY:
The upper frame is tted via 2 screws as shown in gure 2.
gure 1
SIDE FRAME ASSEMBLY FOR INSERTO 700 2.0 :
The side frames are tted using 2 screws per side as shown in gure 2.
THE INSERT MUST OVERLAP THE MARBLE COVERING SURFACE BY AT LEAST 1 CM.
N.B. ANY WOODEN BEAMS LOCATED ABOVE THE INSERT MUST BE PROTECTED WITH NON INFLAMMABLE
MATERIAL.
FRAME ASSEMBLY IS IMPORTANT AS IT ALLOWS CORRECT RECIRCULATION OF THE AIR AND CONSEQUENTLY
OPTIMAL PRODUCT OPERATION.
48 ENGLISH
gure 2