Troubleshooting - Oceanic OCEACLIM140W Guide D'utilisation

When your air conditioner seems to be out-of-order, please check the
suggestions below before contacting after-sales service.
Problems
The appliance does
not work.
The appliance works
only for a while and
then it stops
automatically.
VI. TROUBLESHOOTING
Possible causes
- Verify if the appliance is
plugged in properly.
- Verify if the power cord
or socket is damaged.
- Verify if the fuse is
broken.
- If you are using a remote
control, verify if the
battery is exhausted.
- The appliance has
entered security mode.
- Verify if the air outlet is
blocked by any bulky
object.
- The timer has been
activitated.
- Perform the
connection of
appliance properly.
- Contact an electrician
for its replacement.
- Contact your service
provider to have it
replaced. (For fuse
specification, please
refer to II. Technical
characteristics.)
- Replace the battery of
the remote control by a
new one.
- Allow 3 minutes
before pressing the
power-on button as the
protection device may
be activated.
- Remove the obstacle.
- Turn on the appliance
again. Then set the
timer.
55
Solutions