Troubleshooting - Oceanic OCEACLIM120SR Guide D'utilisation

When your air conditioner seems to be out-of-order, please check the
suggestions below before contacting after-sales service.
Problems
The appliance does
not work.
The appliance
works only for a
while and then it
stops automatically.
VI. TROUBLESHOOTING
Possible causes
- Verify if the appliance is
plugged in properly.
- Verify if the power cord or
socket is damaged.
- Verify if the fuse is broken.
- If you are using a remote
control, verify if the battery
is exhausted.
- The appliance has
entered security mode.
- Verify if the air outlet is
blocked by any bulky
object.
- The timer has been
activitated.
59
Solutions
- Perform the
connection of
appliance properly.
- Contact an
electrician for its
replacement.
- Contact your service
provider to have it
replaced. (For fuse
specification, please
refer to II. Technical
characteristics.)
- Replace the battery
of the remote control
by a new one.
- Allow 3 minutes
before pressing the
power-on button as
the protection device
may be activated.
- Remove the
obstacle.
- Turn on the
appliance again. Then
set the timer.