Troubleshooting - Oceanic OCEACLIM110W Guide D'utilisation

Please check the following before contacting a professional electrician:
Faults
The air conditioner
does not function.
The appliance
doesn't cool
effectively.
The appliance
produces excess
noise and
vibrates.
VI. TROUBLESHOOTING
Possibles causes
• Is it switched on?
• Is it plugged in
properly?
• Is the fuse or circuit
breaker failed?
• Has a timer been set?
• Is the water tank full?
• Is one of the air outlet
been blocked?
• Is there any other
heating source available
in the room?
• Are the filters dirty?
• Is the set temperature
appropriate?
• Is the fan set at slow
speed?
• Is the appliance
inclined? Is it placed on
flat ground?
• Turn it on.
• Connect the cable and
plug to a socket properly.
• Replace the fuse or
reset the circuit breaker.
• Change timer setting.
• Drain water.
• Unblock the outlet(s).
• Remove all other
heating sources.
• Clean the filters.
• Change the temperature
setting.
• Select an appropriate
speed.
• Make sure that the
appliance is placed on a
plain surface without
inclination.
61
Solutions