Cleaning; Troubleshooting - Muller licht tint 404028 Mode D'emploi

Cleaning

Turn off the light and pull out the power plug and/or turn off the room
protection at the fuse box.
Clean the bulb and remote control only with a dry cloth. If not in use, keep
them in a dry place protected from children.

Troubleshooting

Problem
Tint product is not working.
The wrong tint product lights up.
The light switches off suddenly.
You have added a new tint product
and this bulb switches off when
you select a colored light function.
tint-LED-PANEL
INSTRUCTION MANUAL
71
Possible causes
The batteries in the tint remote
control are dead and must be
replaced.
The tint product itself is switched
off or the mains plug is not
plugged in.
You have selected the wrong
group, or have not selected a
group, using the group button.
Select the right group or select
"All groups" by pressing the group
button repeatedly (all LEDs above
the group button will light up).
Use the group button to select
the right group or use the group
button to select "All groups".
You have selected the "Sunset"
scene. Not an error.
The new tint product can only light
up in white. Not an error.