Muller licht tint 404028 Mode D'emploi page 65

• An individual tint product could also be a group all on its own.
• You can use the tint remote control to control a maximum of 4
groups, whereby the fourth group is a combination of the other three
groups.
• Think beforehand about which tint products you want to group
together and try to make the groups logical and comprehensible.
This means you will be able to use the groups later using the group
button quickly and without having to waste time testing them.
Using the group button
• The first time the group button is pressed, the LEDs above it will
show which group you are in.
• Pressing it again will advance you one group.
• You are in the next group when the following LED above the group
button lights up:
° LED 1 for the first group
° LED 2 for the second group
° LED 3 for the third group
° LED 1, 2 and 3 for all groups
Adding a new tint product
• Take note of the technical specifications when purchasing new
tint products. We recommend tint tint bulbs and luminaires from
Müller-Licht. When using products made by other manufacturers, it
is not guaranteed that all features will be supported or will work as
intended.
Integrate each product in the remote control one at a time and
turn off the others during the connection.
tint-LED-PANEL
INSTRUCTION MANUAL
65