Installing The Led Panel - Muller licht tint 404028 Mode D'emploi

Installing the LED panel

1. Before installing, de-energise the mains wiring: Switch off the circuit breaker,
or remove the fuse and secure to prevent reactivation.
2. Use the wall bracket to mark the holes to be drilled in the ceiling.
Make sure not to drill any cables or pipes in the area.
Drill at the marked points and insert the dowels. Now fasten the bracket with
the corresponding screws.
3. Connect the connection cable to the terminal strip in the connection box.
Make sure that the cables are secure, and close the connection box.
4. Now connect the cable of the LED driver to the LED panel.
5./6. Depending on the model: Slide/rotate the LED panel onto the fixed bracket.
7. Reactivate the breaker.
LED-PANEL
404028 | 404029
LED-PANEL
404028 | 404029
À
À
Ã
Ã
LED-PANEL
404030
LED-PANEL
404030
À
À
Ã
Ã
tint-LED-PANEL
INSTRUCTION MANUAL
61
œ
œ
Õ
Õ
Œ
Œ
œ
œ
Õ
Õ
Œ
Œ
–
–
–
–