Muller licht tint 404028 Mode D'emploi page 70

control systems, such as Philips Hue* (without Hue Entertainment and
without HomeKit integration), Osram Lightify*, Amazon's voice assistant
(using Amazon Echo Plus)** and many more. More information about the
Zigbee Alliance can be found at www.zigbee.org.
For integration in a Smart Home gateway/app, the LED panel
must be reset, see „Resetting the tint product". This initially
clears the connection to the tint remote control.
Integration in a Zigbee gateway:
•
Start the search in the corresponding app.
•
Only now switch on the tint product (in pairing mode), even if this is
specified differently in the app.
•
The tint product is found by the app within a few seconds and flashes
briefly for confirmation. Depending on the app, the search takes a
few seconds after which the tint product is displayed in the app as a
new device and can be named as required.
A separate connection procedure must be carried out for each tint pro-
duct. To avoid problems, turn off all other tint products while pairing a new
tint product to the app.
The tint remote control can also be integrated in some Zigbee gateways,
so that LED bulbs and remote control can be used in parallel. Instructions
and further information can be found at www.mueller-licht.de/tint
* Restrictions on individual services possible, updated information
on www.mueller-licht.de/tint/kompatibilitaet
** If this service is available in your country.
tint-LED-PANEL
INSTRUCTION MANUAL
70