Setup; Inserting The Batteries - Muller licht tint 404028 Mode D'emploi

15 Battery compart-
ment for 2 batteries
LR03 (AAA)

Setup

Inserting the batteries

1. Open the battery compartment at the rear of the tint
remote control.
2. Insert 2 LR03 (AAA) / 1.5V batteries as shown on
the bottom of the battery compartment. Ensure the
correct polarity of the batteries (+/-).
3. Close the battery compartment cover again.
Using the wall bracket (optional)
You can use the wall bracket (supplied) to store the tint remote control
safely. A magnet in the bracket will hold the tint remote control safely in
the bracket.
The bracket can be mounted on a surface of your choice with adhesive
strips or screws and wall plugs if required.
The bracket will still attract metal objects, even without any adhesive or
screws.
tint-LED-PANEL
INSTRUCTION MANUAL
59
14 Reset button