Resetting The Factory Presets - Yamaha HTR-5830 Mode D'emploi

If you want to reset all of your unit's parameters for any
reason, do the following. This procedure completely
resets ALL parameters, including the SET MENU, level,
assign, and tuner presets.
Be sure this unit is in standby mode.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
PHONES SPEAKERS STEREO PROGRAM
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
1,2
1,3
1
With the unit in standby mode, hold down
STEREO (EFFECT) on the front panel and
press STANDBY/ON.
"PRESET" appears in the front panel display.
If you are using Asia and General model, press
PROGRAM l / h to select "PRESET".
y
• To cancel the initialization procedure without making any
changes, press STANDBY/ON.
2
Press STEREO (EFFECT) to select the
desired setting.
RESET
To reset the unit to its factory presets.
CANCEL
To cancel without making any changes.
3
Press STANDBY/ON to confirm your
selection.
If you selected "RESET", the unit is reset to its
factory presets and switches to standby mode.
If you selected "CANCEL", the unit switches to
standby mode and nothing is reset.

RESETTING THE FACTORY PRESETS

VOLUME
FREQ/TEXT EON
PTY SEEK
MODE START
PRESET/TUNING MEMORY TUNING MODE
SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
INPUT MODE 6CH INPUT
53