Recording - Yamaha HTR-5830 Mode D'emploi

Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
SPEAKERS STEREO PROGRAM
PHONES
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
DVD D-TV/CBL VCR
CD MD/CD-R V-AUX
2
TUNER A/B/C/D/E
q/DTS 6.1/5.1
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
or
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.

RECORDING

VOLUME
FREQ/TEXT EON
PTY SEEK
MODE START
PRESET/TUNING MEMORY TUNING MODE
SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
INPUT MODE 6CH INPUT
2
POWER
6CH IN
PRESET
NIGHT SLEEP
DVD D-TV/CBL VCR POWER
CD MD/CD-R V-AUX 6CH IN
TUNER A/B/C/D/E PRESET
Remote control
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, "SP LEVEL"
(page 21) and programs does not affect the recorded material.
• A source connected to the 6CH INPUT jacks of this unit
cannot be recorded.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
39