Playback - Yamaha HTR-5830 Mode D'emploi

1
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
PHONES SPEAKERS STEREO PROGRAM
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
3 6
DVD D-TV/CBL VCR
CD
4
TUNER
q/DTS 6.1/5.1
TEST
PROG
LEVEL
7
1
Press STANDBY/ON (or POWER on the
remote control) to turn on the power.
STANDBY
/ON
Front panel
2
Turn on the video monitor connected to this
unit.
3
Press SPEAKERS A/B/OFF on the front
panel to select the front speakers you want
to use.
SPEAKERS
22

PLAYBACK

6
VOLUME
FREQ/TEXT EON
PTY SEEK
MODE START
PRESET/TUNING MEMORY TUNING MODE
NEXT SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
INPUT MODE 6CH INPUT
7 4 7
POWER
1
MD/CD-R V-AUX 6CH IN
A/B/C/D/E PRESET
NIGHT SLEEP
STEREO
6
VOLUME
PROG
MUTE
SET MENU
VOLUME
POWER
or
Remote control
A/B/OFF
4
Press INPUT l / h repeatedly (or one of the
input selector buttons on the remote control)
to select the input you desire.
The selected input source name and input mode
appear on the front panel display for a few seconds.
INPUT
Front panel
VCR V-AUX
DVD
Selected input source
5
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
6
Adjust the volume to the desired level.
VOLUME
Front panel
If desired, use TONE CONTROL and
BASS/TREBLE –/+. These controls only effect the
sound from the front speakers.
TONE CONTROL
Front panel
Notes
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and surround speakers may not match that of the front
left and right speakers.
• If you have connected a recording component to the VCR
OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback from other components, try
turning on the recording component.
DVD D-TV/CBL VCR POWER
CD MD/CD-R V-AUX 6CH IN
or
TUNER A/B/C/D/E PRESET
Remote control
DTV/CBL DVD MD/CD-R TUNER CD
VOLUME
AUTO
Input mode
VOLUME
or
VOLUME
Remote control
BASS/TREBLE
dB