Resetting The System - Yamaha HTR-6230 Mode D'emploi

■
Remote control
Problem
The remote control Wrong distance or angle.
does not work nor
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The remote control code is not correctly
set.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
■

Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings. For details about the procedure of
resetting the system, see "Initializing" in "Advanced setup" on page 40.
Cause
The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
Reposition this unit.
Replace all batteries.
Set the remote control code correctly using "List of
remote control codes" at the end of this manual.
Try setting another code for the same manufacturer
using "List of remote control codes" at the end of this
manual.
Troubleshooting
Remedy
See
page
8
—
8
39
39
45
En