Connecting The Antennas - Yamaha HTR-5830 Mode D'emploi

Connecting the antennas

Both AM and FM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength.
Connect each antenna correctly to the designated
terminals.
AM loop antenna
(included)
DEO
TUNER
AM
ANT
GND
FM
ANT
Ω
75
UNBAL.
MONITOR
OUT
Ground (GND terminal)
For maximum safety and minimum
interference, connect the antenna GND
terminal to a good earth ground. A good
earth ground is a metal stake driven into
moist earth.
I Connecting the AM loop antenna
1
Indoor FM
antenna
(included)
2
3
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
• A properly installed outdoor antenna provides clearer
Set up the AM loop antenna.
Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and
GND terminals.
Orient the AM loop antenna for the best
reception.
Notes
outdoor AM antenna is connected to this unit.
reception than an indoor one. If you experience poor reception
quality, an outdoor antenna may improve the quality. Consult
the nearest authorized YAMAHA dealer or service center
about the outdoor antennas.
CONNECTIONS
13