Manual Unlocking - SCS Sentinel OpenGate 3 SAFETY Manuel D'installation Et D'utilisation

EN
> MANUAL UNLOCKINg
In case of power failure or to program your gate automation, you can manually unlock the motors.
Situate yourself at the interior of the gate. Remove the plug and insert the six-sided unlocking key, then
turn between fi ve and ten times. You will now be able to open your gate manually.
To return your motor to the locked position, remove the plug and insert the six-sided unlocking key,
then turn between fi ve and ten times in the opposite direction.
Do not forget to replace the plug afterwards.
5 rounds and more
> INSTALLATION OF THE MECHANICAL TRAVEL LIMITS.
(Diagrams are as seen from the inside of the property)
2 limit switches
ème
1 limit switches
ère
open at left
2 limit switches
ème
1 limit switches
ère
open at right
EN ::: 23 EN ::: 23