SCS Sentinel OpenGate 3 SAFETY Manuel D'installation Et D'utilisation page 52

EN
At the upper slides: Risk of hands being trapped.
3
Solution: Maintain a secure zone; visually identify the area at risk. Safety distance <8mm.
portal
portail
portail
Between the rack and pinion. Risk of hands being drawn into the mechanism.
4
Solution: Protection (hood or wire mesh)
Between the bars of an open bar gate: Risk presented by the scissoring action.
5
Solution: Condemn the spaces in-between the bars with wire mesh (link diameter
20mm x 20mm maximum), with solid panels or with a sensor bar.
Connecting sensor bars: Connect to connection block J1 at posts 6 and 7.
You may also install an emergency stop button near to the installation. Connect the push button in series
to the AC power supply (between FS1 and the transformer's cable).
EN ::: 10
glissière
slide
glissière
pilier
pillar
pilier
a
a
a
a
OR
glissière
slide
glissière
a
a
a <8 mm
a <8 mm
portal
portail
portail
portail
protecteur
portal
portail
protective
protecteur
a
a
a
a
a
a
a <8 mm
a <8 mm