Safety Instructions - SCS Sentinel OpenGate 3 SAFETY Manuel D'installation Et D'utilisation

SAFETY INSTRUCTIONS

Warning: For the safety of people and property, you must follow these instructions and keep
them safely.
We advise you to take the time to read and apply these instructions. Incorrect installation and
programming can be dangerous and cause serious injury.
If you have any doubts about installing this product, seek advice from our technical service.
This symbol indicates points that are potential hazards.
Be careful to apply the instructions and safety standards that apply in the country of installation.
This apparatus complies with the essential requirements and other provisions of directive 1999/5/EC. gate
automation systems or garage doors must be installed in accordance with the «Machinery Directive»
2006/42/EC (MD), and more precisely standards EN 12445:2001, EN 12453:2001, EN 12978:2003+A1:2009
and EN13241-1:2003. These standards declare the presumed conformity of the automation system.
This automation system must be installed, brought into service and maintained by a
qualified and specialized professional.
>
warning
- Analyse the risks of your installation, list the essential safety requirements set out in appendix I of the
«Machinery Directive»
To fill in this document, if necessary, ask a professional installer.
- The manufacturer of this automation system cannot be deemed liable for failure to observe the rules
governing proper installation and use.
- Incorrect installation or adjusting can cause serious injury to users or the installer.
- The following warnings form an integral and essential part of the product and must be issued to the
user.
- Carefully read these warnings because they provide important guidelines on installation, use and
maintenance.
- Keep this manual safely and hand it on to any future users of the installation.
- Incorrect installation or misuse of this product could cause serious danger.
- The manufacturer accepts no responsibility for devices and/or components incompatible with the
integrity, safety and operation of the product.
- Only original spare parts must be used to repair or construct different parts.
- The installer must provide all relevant information concerning the operation, maintenance and use of
each part and of the system as a whole.
- Implementation, electrical connections and adjustments must be made in accordance with good
practice by a qualified and specialized person.
>
right choice of product
Check whether the product you have acquired for domestic use is suitable for your existing gate and
that you have all the elements needed to guarantee safety. Check the specifications in particular
(weight and dimensions of the gate, openwork or full, sliding or leaf, etc.)
In the kit or as an optional extra you should have all the parts needed to guarantee safety (for instance,
sensing bars for openwork sliding gates). If you have any doubts, call in a professional.
>
checking the condition of the gate
Check that your gate is in good order, and more particularly the solidity of the hinges or slides, the
supports available for the automation system's fixed and moving parts. The motion space must be
unobstructed and clearly visible. The gate must be able to open easily and without friction when you
operate it by hand......
EN ::: 7
EN