Indications In The Display; Hob Functions Table - ETNA KI560ZT Mode D'emploi

USE

Indications in the display

In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
Timer link indication
Warming function selected
No (suitable) pan on cooking zone (pan detection symbol)
Pause function active
Residual heat indicator; The hob has a residual heat indicator for each cook-
ing zone to show those which are still hot. Although the hob is switched off,
the indicator 'H' will remain on for as long as the cooking zone is hot! Avoid
touching them when this indicator is lit. Danger! Risk of burns.
Fault code; See 'Troubleshooting table'

Hob functions table

Function Key(s) to use
Warming
Timer
Pause
Boost
Description
The warming function is used to keep cooked food warm.
The timer can be set separately for each cooking zone.
Cooking times of up to 99 minutes can be programmed.
The timer alarm beeps after the set time has passed.
The cooking zone automatically switches off when the set
time has elapsed. When no cooking zone is selected the
timer works as a minute minder (no automatic switch Off).
To set the hob in pause setting.
You can use the boost function to cook for max. 5 minutes
at the highest power level. The boost function can only be
activated if it is applicable with the cooking zone selected.
EN 11