Care And Maintenance - Reely Wild Hawk 2.0 Notice D'emploi

14. Care and maintenance

Check the rudder linkages and the control functions of the servos on your model regularly. All moving parts have to be
easily movable but there should not be a clearance in the bearing.
Apply a drop of oil on the front and rear motor shaft bearing at regular intervals.
Clean the exterior of the model and the remote control only with a soft, dry cloth or brush. Never use aggressive
cleansing agents or chemical solvents, since this might damage the surfaces.
Important!
When replacing mechanical parts use only original spares available from the manufacturer.
The spare parts list is located on our website www.conrad.com in the download section for the respective
product.
You can also order the replacement parts list by phone. The contact information is included at the beginning
of these operating instructions, chapter "Introduction".
50