Changing The Band Saw Blade - HOLZMANN MASCHINEN HBS 230HQ Mode D'emploi

15.2

Changing the band saw blade

Wear gloves when handling with saw blades!
Before changing the blade, check that the machine is swiched
off and disconet from the power suply
ATTENTION: Take care to install the saw band correctly!
Check the direction of the teething
 Unscrew the D-nut and wing screw on the worktable.
 Open the upper and the lower cover.
 Set the upper saw band guide in the lowest position
 Open the cover of upper guide assembly
 Loosen the quick release handle
 Remove the band saw blade from the machine.
 Insert a new bandsaw blade with the right direction
on the rubber tyres on the band saw wheels.
 Check the declared adjustment.
Upper Cover
cover of upper guide
Lower Cover
HOLZMANN MASCHINEN GmbH
W A R N I N G
HIGHEST RISK OF CUTTING INJURY!
www.holzmann-maschinen.at
MAINTENANCE
D-nut
Wing screw
43
HBS 230HQ