Starting / Stopping The Engine - Stihl FS 70 Notice D'emploi

Masquer les pouces Voir aussi pour FS 70:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Harness
2
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
FS 70 R
Starting / Stopping the
Engine
Controls
1
3
1
Throttle trigger lockout
2
Throttle trigger
3
Stop switch with Run and 0 = Stop
positions. Press the stop switch to
switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
1
2
Starting the Engine
4
Press the manual fuel pump
N
bulb (P) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
5
Press in the choke lever (5) and turn
N
it to g at the same time.
Warm engine (warm start)
5
Press in the choke lever (5) and turn
N
it to < at the same time.
English
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières