Mounting The Cutting Attachment - Stihl FS 70 Notice D'emploi

English
Position the deflector against the
N
gearbox so that the lug (3) engages
the recess (4) in the deflector.
Insert the screw (5) and tighten it
N
down firmly.
14
Mounting the Cutting
Attachment
Laying down the machine
Switch off the engine
N
Lay down the machine so that the
N
mount for the cutting attachment
faces upward
Fitting the Thrust Plate
The machine comes standard with the
thrust plate.
1
Slip the thrust plate (1) over the
N
shaft (2).
NOTICE
The thrust plate on the gearbox is
necessary for mounting cutting tools.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
If mounting hardware is not packed with
machine
2
Only mowing heads may be used which
mount directly to the shaft (2).
If mounting hardware is packed with
machine
Mowing heads and metal cutting tools
may be mounted.
FS 70 R