Connexion Of The Different Elements - BORETTI BIZ-4 Mode D'emploi

Connexion of the different elements

The installation of this appliance and the con-
nection to the electrical network should be
made by an electrician perfectly aware, and in
respect of the normative regulations.
Connection of cooking zones
Each connector of the cooking zones, is located
by a sticker with the classification from
5 to 8 corresponds to:
• 5: Heating zone 1100 W /
Glass diameter 270mm
• 7: Heating zone 2300 W /
Glass diameter 300mm
Example:
• The installation of this appliance and the connection to the electrical network should be en-
trusted only to an electrician whom is aware of the local regulations and which respects them
scrupulously.
• Protection against the parts under tension must be ensured after the building-in.
• The necessary data for connection are on the stickers placed on the hob casing near the con-
nection box.
• The connection to the main must be made using an earthed plug or via an omni polar circuit
breaking device with a contact opening of at least 3 mm.
• The electrical circuit must be separated from the network by adapted devices, for example:
circuit breakers, fuses or contactors.
42
• The fingertouch electronic is located by "C"
on the connector
On the technical box, near the female connec-
tors are written: 5-6-7-8-C.
Connect the fingertouch on the "C" of the tech-
nical box.
Connect the heating zones with the correspon-
ding number on the technical box.
To connect easily, begging with the biggest
number of the heating zone.