Multizones Installation - BORETTI BIZ-4 Mode D'emploi

Multizones installation

• Unpack all the material.
• The installation and connection of the ap-
pliance have to be done by approved spe-
cialists. The manufacturer can not be held
responsible for damage caused by building-in
or connecting errors.
• The appliancemust be well-equipped and in-
stalled in a kitchen unit and an adapted and
approved work surface.
• This domestic appliance is exclusively for the
cooking of food, to the exclusion of any other
domestic, commercial or industrial use.
Ventilation
Important: the cooling system needs some airfl ow.
Take into account to keep the gap in front of the air inlet of the cooling fan
40
• Remove all labels and self-adhesives from
the ceramic glass.
• Do not transform or modify the appliance.
• The cooking zones and the control panel
should not be used as support or worktop.
• The appliance must be grounded and con-
nected conform to local standards.
• Do not use any extension cable to connect
it.
• The appliance can not be used above a dis-
hwasher or a tumble-dryer: steam may da-
mage the electronic appliances.