Pari LC SPRINT Mode D'emploi page 56

Inhaling with the mouthpiece
• Sit in an upright position and relax.
• Hold the mouthpiece between your teeth and enclose it with
your lips.
• Breathe in as slowly and deeply as possible through the
mouthpiece, and out again calmly.
• Carry out the inhalation treatment until the noise in the
nebuliser changes.
Some residual fluid will remain in the nebuliser after the end
of the treatment.
Using the LC interrupter
If the LC interrupter is attached, aerosol is not generated until
the interrupter button is pressed. Proceed as follows to inhale
and to interrupt aerosol generation when breathing out:
• Press the interrupter button to
generate aerosol.
Info: If the button cannot be
pressed, it is locked and the
LC interrupter has been set for
permanent nebulising. In this
case, unlock the interrupter
button by turning it counter-
clockwise as far as it will go.
• Release the button to interrupt aerosol generation.
If you want to use the permanent nebulising function even with
the LC interrupter fitted:
• Turn the interrupter button
clockwise as far as it will go.
Æ The aerosol is generated per-
manently (permanent
nebulising).
– 20 –