Technical details
Heat output
Voltage
Protection class
Lamp
Reach
Model
Oscillatable
House
Dimensions
Weight
Important safety warnings
1. The patio heater may only be connected to a 220-240V / 50Hz,
earthed socket. Connection to the incorrect voltage is hazardous
and will invalidate the guarantee!
2. The patio heater must be exclusively used for the function for which
it is designed, i.e. heating a patio or a similar location. Do not use it
to dry textiles! The patio heater is not meant to be used
commercially and is not to be used to heat buildings, greenhouses,
sheds, etc.
3. The heating lamps are fragile so handle the patio heater with care.
Avoid knocking the device, letting it fall etc.
4. The patio heater must be installed according to the instructions set
out under 'installing the heater' (see later).
5. The patio heater is powerful and emits intense heat. We
recommend that people (particularly the elderly, babies and the
infirm) and animals are not exposed to direct heat.
6. The patio heater may not be installed or used in the immediate
vicinity of flammable objects such as curtains, furniture etc. It may
not be located too close to a socket and should not be used in a
damp area such as a bath/shower room, by a swimming pool etc.
7. Do not run the cord underneath carpeting; do not cover it with mats,
carpet strips, or similar and make sure it is not placed in any
passageways. Make sure the cord cannot be stepped on and that no
furniture is placed on top of it. Do not lead the cord around sharp
corners and do not roll it up too tightly after use!
Q-Time 2000
1000-2000 W
220-240V / 50Hz
IP24
Quartz
Max 14 m²
Hanging at te wall
± 35° ↕
metal
22 x 50 x 31 cm
2,1 kg
Q-Time 2000S
1000-2000 W
220-240V / 50Hz
IP24
Quartz
Max 14 m²
Standing on a standard
360° ↔
metal
22 x 50 x 200 cm
9,5 kg
13
± 35°↕