EUROM ALUTHERM BASEBOARD Wi-Fi Manuel D'utilisation page 53

Note: timer settings that are created using the app are not visible on the display;
timer settings that are created using the operating panel or remote control are not
visible on the app! Once there is a wifi connection, you cannot create a new weekly
timer using the panel or the remote control (WEEK and SET buttons are turned off);
any existing, manually entered weekly timer settings will remain active under wifi.
Do not use both methods at the same time!!!
When the heater has logged into wifi, an automatic connection will be made when it
is switched on. The wifi symbol will be on all the time. If the wifi symbol blinks
quickly, there is no connection.
You can reset the wifi settings by pressing and holding the MODE button. Existing
connections will be deleted, the wifi symbol will begin to blink and a new connection
will be made.
You can switch off the wifi connection (and the blinking wifi symbol) by pressing
and holding the ON/OFF button. If you hear a long beep, the wifi is switched off;
the wifi symbol will go out. By pressing and holding the ON/OFF button, you will
hear a short beep to indicate that wifi is switched on again. The wifi symbol will
come back on.
Warning! After switching the heater on or off, you will hear a quiet sound. This is
normal and no reason to worry. It is just the material expanding and shrinking
during heating and cool-down.
Wi-Fi and app operation
The heater can also be controlled with an App. To do this, the heater must be
connected to a Wi-Fi modem.
Download the Eurom Smart App
Scan the QR code below or search for 'Eurom Smart' in the App store or Google
-
Play and follow the download instructions.
The Eurom Smart App will be added.
-
For more information about the App see: www.eurom.nl/nl/manuals.
-
Safety precautions App
Safety and remote operation
Your Eurom heater can be easily operated, via the same WLAN, via a different
WLAN, or via a 3G or 4G mobile network. This makes it possible to operate your
heater remotely, without your direct supervision. Beware that even when
operating the heater remotely, all safety precautions stated in the user manual
supplied must be observed. Read and understand these safety precautions and
make sure that all safety precautions are taken also with remote operation.
53