Description
1. Heat outlet grille
2. Air inlet grille
3. Operating panel and LED display
4. Main switch
5. Remote control
The LED-display (3) has 4 lines:
1st line:
3 suns, that indicate whether the heater is set to low, medium or high capacity.
-
Note: Does not apply to Alutherm 400XS, this model
only has 1 heating level (400W full power).
The wifi symbol. If there is a wifi connection, this
-
symbol will stay on.
"P": thermostat function or working according to
-
weekly timer.
"M": working on set capacity.
-
2nd line:
SET indicates that a day or time can be set.
-
ON indicates that the heater is switched on.
-
OFF indicates that the heater has been switched off
-
by the stand-by button or the topple safeguard.
The figures show the temperature
-
3rd line:
The time: both the ordinary time and the set times for the weekly timer.
-
4th line:
The days of the week: 1 = Monday, 2 = Tuesday and so on.
-
Installation
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
Choose a suitable location (wall-mounted or free-standing) for the
device to take into account all the warnings mentioned earlier in this
manual.
50