SSS Siedle BFCV 850-02 Notice D'utilisation page 7

Save the selected ring tone
melody by pressing the mute
button for 3 seconds.
Button assignment
The buttons of the handsfree tel­
ephone can be used for instance
for establishing internal calls or for
switching and control functions. All
buttons permit double assignment
(with­the­exception­of­the­door­
release button). Each button has
a bottom­mounted lamp to indi­
cate switching statuses. For more
details, please enquire with your
electrical installer.
Switching on the monitor
Pressing­the­monitor­button­will­
show the camera picture from the
door which placed the last door
call. This function is only possible if
there is currently no call connected.
Video memory
The bus telephone is equipped
with a video memory. All visitor
pictures are saved with a date
and time. Up to 28 pictures can
be saved in the device. Once the
memory capacity has been used
up, the oldest picture is over­
written each time a new picture is
taken. After a power cut, pictures
saved in the in­house telephone
are deleted. If the video memory
fails to work, consult your electrical
installer.
Video memory button
If new pictures have been saved,
the video memory button lights up
at the telephone. The last stored
picture is displayed by pressing a
button.­Pressing­the­button­again­
accesses­the­next­picture.
Assigning the monitor buttons
The monitor is operated using a
5­way button. The Enter key is
used to switch on the monitor or
confirm­a­selected­function.­The­
control buttons are used for navi­
gation within the different menu
levels.
Enter button
The control buttons can be
assigned with different functions
depending on the monitor display.
The functions of the buttons are
indicated by a display superim­
posed at the bottom edge of the
monitor.
SD card
At the top of the unit, an addi­
tional SD card can be inserted.
Cards ranging in size from 32 MB
to­32 GB­can­be­used,­with­
capacity for storing between 25
and over 20000 images depending
on the size. One image requires
around­1,2 MB­of­storage­space.­
The images are saved in *.tif
format with a resolution of
720 x 576 Pixel.When­the­card's­
memory is full, the oldest image
is always overwritten. If the card
is inserted, the SD card symbol is
shown in the upper line.
The following displays are pos­
sible:
SD card correctly detected
•­Initializing SD card
•­Card faulty or write
protected
Write/Read process
Do not remove the SD card during
the write and read process.
Formatting the SD card should only
ever take place using the relevant
function of the telephone in order
to­guarantee­the­correct­file­format­
FAT 16/32.
Using the SD card reader, saved
pictures can be transferred to a
computer and processed.
Control but­
tons
7