Mesto PICO Mode D'emploi page 13

Masquer les pouces Voir aussi pour PICO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
IRL
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (→Table 1). Protect the device from frost.
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the piston pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).
Scope of delivery
Tank [1] with pump [2], hose [3], instructions for use [4], spray screen (3232U) [5], carrying
strap [6], shut-off valve [7], spray wand (3232U) [8] or spray wand (3232) [9]. (Fig. 1)
You will find the illustrations referred to in the text in the front fold-out pages 3 – 5 of
these instructions for use.
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Spray wand
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
1. Fasten the carrying strap [6] on the tank [1]. (Fig. 2)
2. Push the tube [3] into the fixture [10] and secure it with the cap nut. (Fig. 3)
3. Push the hose [3] onto the shut-off valve [7] and secure it with the cap nut. (Fig. 3)
4. Screw the spray wand (3232) [9] or spray wand (3232U) [8] onto the shut-off valve [7].
(Fig. 3)
AUS
USA
PICO 3232
Brass 40 cm (17.75 in)
13
NZ
CDN
HERBI 3232U
5 l (1.32 gal)
6.4 l (1.69 gal)
3 bar
30 ° C (104 ° F)
1.3 kg (2.87 lb)
Polyethylene
Plastic 48 cm (18.9 in)
on the side
< 0.04 l (1.35 oz)
1.0 l/min (0.26 gal/min)
< 5 N
IND

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Herbi32323232u

Table des Matières