Bresser Meteotime 4Cast NG Mode D'emploi page 37

setting the Pre-AlArm (iCe WArning AlArm)
• If weekday alarm [
• Press and hold the [set] button for 3 seconds to enter into the Pre-Alarm setting mode "P-ALM"
[ ].
• The number 15 will start flashing, meaning that if selected, the alarm will sound 15 minutes earlier
than the weekday or single alarm.
• Select the desired Pre-Alarm interval in 15 minutes increments between 15 and 90 minutes by
using the [ ▲ ] or [ ▼ ] button.
• Press the [set] button to confirm and exit from the alarm setting mode.
loW BAtterY inDiCAtion
When it is time to replace batteries, the respective low-battery indicator (see graphic) will appear
next to the weather forecast on the weather station or next to the outdoor temperature on the outside
sensor.
low battery indicator icon for
outdoor sensor
low battery indicator icon for
weather station
] or single alarm [ ] is set, the Pre-Alarm [
37
GB/IE
] can be programmed.