Bresser Meteotime 4Cast NG Mode D'emploi page 35

oUtDoor sensor stAtUs
The wave icon above the current channel icon shows the connection status of the corresponding
outdoor sensor:
icon
˚C
˚C
˚C
seArCh for oUtDoor sensors
• The weather station can be manually activated to search for the signals from the outdoor sensors
by pressing and holding the [ ▼ ] button for 3 seconds.
temPerAtUre trenD
• The trend indicator shows the trend of temperatures collected at that particular outdoor sensor.
Three trend indicators are possible: rising, steady and falling.
Arrow indicator
Temperature
Trend
VieWing oUtDoor sensor (ChAnnel) temPerAtUre
s
s
s
static display
• Press the [ChAnnel] button to select measurements from different outdoor sensors, relevant to
the unique channels 1, 2, or 3
note: the included outdoor sensor is defaulted to channel 1. Additionally available outdoor
sensors are required for channel 2 and 3.
Searching for the signals from the outdoor sensor
Corresponding outdoor sensor signal received successfully
No signals received for over 1 hour
˚C
˚C
˚C
rising
s
s
s
35
status
steady
GB/IE
falling