Troubleshooting - VOLTCRAFT VC830 Notice D'emploi

Troubleshooting

In purchasing the DMM, you have acquired a product which has been designed to the state of the
art and is operationally reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions
yourself.
Always follow the safety instructions!
Error
The multimeter does not
work.
No measuring value change.
The meter beeps and
the "WARNING!" symbol
flashes
Repairs other than those described above may only be carried out by an authori-
sed specialist. If you have queries about handling the measuring device, our
technical support is available under the following telephone number:
Voltcraft®, 92242 Hirschau, Lindenweg 15, Tel.-No. 0180 / 586,582 7.
50
Possible cause
Is the battery dead?
Is a wrong measuring function
activated (AC/DC)?
Are the measuring lines
inserted tightly into the
measuring jacks?
Is the fuse defect?
Is the HOLD function activated? Press the button "H" to
(display "H").
Wrongly connected
measuring cables
Remedy
Check the status.
Replace the battery
Check the display (AC/DC)
and switch the function if
applicable.
Check the proper fit of the
measuring lines.
Check the fuses.
deactivate this function.
Connect measuring lines
properly to the meter or
change the measuring function.