Publicité
Les langues disponibles
Les langues disponibles
1
Wipe out the old grease inside and replace with a fresh
grease (60 g; 2 oz). Use only Makita genuine hammer
grease (optional accessory). Filling with more than the
specified amount of grease (approx. 60 g; 2 oz) can
cause faulty hammering action or tool failure. Fill only
with the specified amount of grease.
Reinstall the crank cap and tighten with the hex wrench.
Connect the connector and reinstall the handle.
1
CAUTION:
•
Do not tighten the crank cap excessively. It is made
of resin and is subject to breakage.
•
Be careful not to damage the connector or lead
wires especially when wiping out the old grease or
installing the handle.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
003243
1. Hex wrench
1
2. Crank cap
2
003247
1. Hammer grease
005230
1. Connector
2. White
3. Black
3
2
ACCESSORIES
CAUTION:
•
These accessories or attachments are recom-
mended for use with your Makita tool specified in
this manual. The use of any other accessories or
attachments might present a risk of injury to per-
sons. Only use accessory or attachment for its
stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Bull point
•
Cold chisel
•
Hammer grease
•
Bit grease
•
Depth gauge
•
Blow-out bulb
•
Safety goggles
•
Plastic carrying case
•
Spline shank Carbide-tipped bits
•
Scaling chisel
•
Grooving chisel
•
Spline shank to A-Taper adapter
•
Spline shank to SDS adapter
•
Core bit
•
Clay spade
•
Side handle
•
Side grip
•
Rammer
•
Bushing tool
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period of
ONE YEAR from the date of original purchase. Should
any trouble develop during this one year period, return
the COMPLETE tool, freight prepaid, to one of Makita's
Factory or Authorized Service Centers. If inspection
shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace)
without charge.
This Warranty does not apply where:
•
repairs have been made or attempted by others:
•
repairs are required because of normal wear and
tear:
•
the tool has been abused, misused or improperly
maintained:
•
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-
AGES FROM THE SALE OR USE OF THE PRODUCT.
9
EN0006-1
Publicité
