Typographical Conventions; Identification Data - John Bean B 2000P Manuel D'utilisation

1
1-2
d
e
f
g
h
1-3
10
b c
Safety
(figure 1-2)
1 Pedal to operate the Power Clamp and the main
shaft lock.
Always work in a clean area and with clean wheels.
WARNING:
THIS MACHINE HAS A SINGLE OPERATING
STATION (A). THE OPERATOR IS RESPONSIBLE
FOR RESTRICTING ACCESS TO THE WORK
AREA AND FOR ANY CONSEQUENCE ARISING
FROM USING THE EQUIPMENT
Note:
THE USE OF THIS DEVICE IS ALLOWED
ONLY TO PERSONNEL DULY TRAINED BY AN
AUTHORIZED DEALER AND IN POSITION (A).
OPERATOR MUST BE NEAR THE MACHINE IN
GOOD WORKING POSITION; CONTROL SIDE (A).
1.1

Typographical conventions

This manual contains text styles intended to make the
reader pay extra attention:
Suggestion or explanation.
Note:
CAUTION: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN DAMAGE TO THE UNIT
OR OBJECTS ATTACHED TO IT.
WARNING: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN (SERIOUS) INJURY TO
THE OPERATOR OR OTHERS.
• Bulleted list:
• Indicates that action must be taken by the operator
before proceeding to the next step in the sequence.
n°) = see the Chapter number.
F
TOPIC (
The topic indicated is explained in full in the charter
specifi er.
1.1.1 Identification data
An identification plate attached to the machine,
shows the following data Fig. 1-3:
a- Name and address of the manufacturer
b- Conformity marking
c- Year of manufacture
d- Model
e- Serial number
f- Weight
a
g- Electric specifications (volt, ph, Hz, kW and A)
h- Acoustic pressure
.. ..........
_